Yamaha Outboard Rigging Kit 703/CLS

Yamaha Outboard Rigging Kit 703/CLS

Yamaha Outboard Rigging Kit 703/CLS is the definitive professional choice for single-engine mechanical setups.

This kit combines the legendary reliability of the 703 Side-Mount Remote Control with the cutting-edge intelligence of the CL5 Touchscreen Display. It’s more than just a throttle and a screen; it’s a complete command centre designed to give you effortless control and absolute peace of mind.

Yamaha Outboard Rigging Kit 703/CLS  Key Features

Yamaha 703 Side-Mount Remote Control
The industry standard for mechanical control, refined for modern boating.

• Ergonomic Precision: Features a redesigned handle with a thumb-operated Power Trim and Tilt switch for intuitive, one-handed engine adjustment.
• Versatile Installation: The reversible handle allows for either right-hand or left-hand mounting, making it suitable for a wide variety of boat types, from RIBs to center consoles.
• Built-in Safety: Includes an integrated engine-stop lanyard switch and a fast-idle lever for quick, safe engine warm-ups.
• Smooth Operation: Engineered for crisp shifting and precise throttle response, ensuring you feel connected to your engine at every RPM.
• Vivid Data Display: A sleek, low-profile 5-inch touchscreen that is easy to read even in direct sunlight. It monitors everything from engine RPM and trim levels to fuel flow and battery voltage.
• Smart Functions: Gain access to advanced features such as Trolling Mode (adjusting speed in precise RPM increments) and Trim Assist (available on compatible models).
• Multi-Engine Capability: While this kit is tailored for single engines, the CL5 is capable of monitoring up to five outboards, making it a future-proof investment.
• Compact Footprint: Its slim design leaves plenty of room on your console for other electronics without sacrificing screen real estate.
• Plug-and-Play Integration: As a genuine Yamaha rigging kit, every component is designed to work seamlessly together via the Yamaha Digital Network.
• Corrosion Resistance: Built to withstand the harsh UK marine environment, ensuring longevity and maintaining your boat’s resale value.

What’s in the Box?

• • 703 Side-Mount Control Box (with 10-pin harness)
  • CL5 Digital Network Gauge Kit
  • Speed Sensor
  • All necessary pigtail buses and wiring for a standard installation

Morgan Marine Expert Tip: This kit is ideal for Yamaha EFI engines from the F20 up to the F300 (mechanical models). If you aren't sure about compatibility with your specific engine serial number, please get in touch with our team – we’re here to help you get it right the first time.

Yamaha Outboard Rigging Kit 703/CLS  FAQs

What exactly is included in this rigging kit?

This is a comprehensive "plug-and-play" kit designed to modernise your helm. It includes:

• • 703 Side-Mount Remote Control Box: The industry standard for single-engine mechanical outboards, featuring an integrated key switch and emergency stop.
  • CL5 Colour Touchscreen Display: Yamaha’s latest 5-inch digital network gauge, providing crisp, clear data for fuel flow, engine vitals, and more.
  • Wiring & Network Components: This typically includes the 10-pin main harness (usually 5m/16ft), a PBI (Power Supply) hub, and the necessary NMEA 2000® compatible bus wires to link the engine to the display.

Will this kit work with my current Yamaha outboard?

The 703 control is designed for Yamaha outboards with mechanical (cable) throttle and shift. The CL5 gauge requires the engine to be compatible with Yamaha’s Digital Network System (Command Link) and generally compatible with: Most fuel-injected (EFI) four-stroke models from F30 up to F150.

Important Check: Your engine must have a 10-pin connector for the control box and a 4-pin "device" plug for the digital data. If you’re unsure, just give us a ring with your engine serial number!

Can the 703 control box be mounted on either side of the boat?

Yes, it can. While it comes set up for right-hand (starboard) mounting as standard, the handle is reversible, allowing for port-side installation. However, do keep in mind that the trim switch orientation may feel slightly different if reversed.

What is the benefit of the CL5 gauge over the older round 6Y8 gauges?

The CL5 is a significant leap forward. It’s a slim, tablet-style touchscreen that can monitor up to five engines (though this kit is for a single setup). It’s much easier to read in direct sunlight, offers customisable data screens, and provides much more detailed fault code information if something ever goes wrong, saving you time and guesswork.

Do I need to buy control cables separately?

Yes. Because every boat requires a different length, throttle and shift cables are not included in the standard rigging kit. We highly recommend Yamaha Premium "Power Matched" cables for the smoothest operation, especially if you have tight bends in your cable routing.

Is this kit easy to install myself?

If you are comfortable with basic marine electrics and routing cables, it is straightforward. However, the CL5 gauge requires some initial configuration to "recognise" your specific engine model. As your authorised Yamaha dealer, we can pre-configure the gauge for you before dispatch, or our Brightlingsea workshop team can handle the full installation for peace of mind.

Does the control box include a kill cord?

Absolutely. Safety is paramount, and the 703 box comes with a genuine Yamaha emergency stop switch and a coiled lanyard (kill cord) included.

Morgan Marine Pro Tip: When installing the CL5 gauge, ensure you have enough clearance behind the console. While the screen is slim, the NMEA connectors require a few inches of depth to avoid pinching the wires.