Garmin Transducer - AIRMAR R111LH

Garmin Transducer - AIRMAR R111LH

Garmin AIRMAR R111LH are in-hull or pocket mounted transducers that use narrow beams at low/high frequencies to display depth and temperature data to your Garmin Marine Network via your sonar, such as the GSD 26.

Garmin AIRMAR R111LH Key Features

Designed to allow both traditional and Spread Spectrum scanning, this 2 kW bare wire, plastic transducer has a maximum depth of 8,000 ft; an operating frequency of 38 to 75 kHz and 130 to 210 kHz; and a beamwidth of 10x19 degrees. The in-hull mounts on a 0-25° deadrise angle; the pocket mount is installation dependent.

• Transducer frequency - CHIRP Low (38-75 kHz) CHIRP High (130-210 kHz)
• Transducer power - 2 kW
• Transducer beamwidth - 10°x19°/4°-8°
• Transducer maximum depth - 6,000 ft.
• Transducer cable length - 49 ft.
• Transducer depth/speed/temperature - Depth and Temperature
• Transducer number of pins - Bare wires
• Transducer supported deadrise/transom angles - 0°-25° degree deadrise.

Garmin AIRMAR R111LH FAQs

• When using with a 6-pin Garmin sounder, transducer does this product require an adapter ?  When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required
• Can this product be used on wooden Hulls ?  No this product cannot be used on Wooden hulls.
• Can this product be used In-hull for cored-hull vessels ? No this product cannot be used in hull for cored vessels unfortunately .